NXP Platforms We Work With

The selection of NXP will depend upon the parameters of performance, connection, power consumption, life cycle, security, and cost.

NXP i.MX RT Series

NXP's i.MX RT series includes highly efficient crossover MCUs that can be used in industrial gateways, motor controllers, HMI panels, edge AI devices, streaming sound and video devices, and real-time IoT applications.

NXP i.MX Application Processors

Embedded Linux solutions, industrial HMIs, smart displays, camera solutions, gateways, and multimedia solutions.

NXP S32K Automotive MCUs

Automotive electronic control units, CAN/CAN FD communications, telematics, electric vehicles, diagnostic, and body controller solutions.

NXP LPC Series

Industrial control, data acquisition solutions, sensor technology, low-power solutions, and deterministic control.

NXP Kinetis Series

Connected sensors, energy management solutions, wearables, BLE, and smart home solutions.

NXP RW61x and Wireless MCUs

Wi-Fi, BLE, Matter, Thread, Zigbee, and smart home connectivity solutions.

NXP Layerscape Processors

Network appliances, secure edge gateways, communication solutions, and high-throughput embedded solutions.

Case Study: NXP i.MX RT1060 Industrial Vibration Monitoring System

NXP i.MX RT1060 Industrial Vibration Monitoring System
Overview

VibraSense Pro Predictive Maintenance

Adequate Infosoft has built a Vibration Monitoring solution called VibraSense Pro that can be used in industries to identify any potential problems in rotating machinery prior to any shutdowns, which can cause huge losses. This solution was designed specifically for the equipment like motors, pumps, compressors, gearboxes etc., where early identification of imbalance, misalignment, bearing wearing and vibrations is critical.

Challenge

The Challenge

In general, existing machine inspection systems are reliant on frequent manual checks, separate monitoring systems, and late reports. As a result, maintenance crews cannot detect emerging equipment malfunctions in time.

The customer needed a scalable and budget-friendly monitoring system that would be capable of collecting high-frequency vibration signals, processing them locally, sending information securely to cloud infrastructure, and offering maintenance recommendations via software dashboards.

Hardware & PCB

NXP i.MX RT1060 Hardware and PCB Design

The reason why we chose to use the NXP i.MX RT1060 crossover MCU was that it offered high-speed processing (600 MHz Arm Cortex-M7 core) and real-time embedded control along with a lot of peripherals.

The PCB was designed by our hardware group to be multi-layered and to have MEMS accelerometers for vibration sensing as well as the option to use external piezoelectric sensors where higher accuracy is needed. Other components on the board include Ethernet for reliable industrial communication, Wi-Fi for convenient mounting, low noise power supply and battery backup.

Priorities during PCB design were signal integrity, reduced EMI, thermals, sensor acquisition and reliability in an industrial environment.

Firmware & Edge

Firmware in Real-Time and Edge Analytics

The firmware has been developed using FreeRTOS for organising time-sensitive tasks in a predictable manner. Custom sensors drivers have been implemented along with DMA based data acquisition and communication stacks.

In order to avoid sending all vibration data through the cloud, the device has performed the analysis of the data locally. FFT processing and machine learning inference have been carried out on the device in order to detect abnormal vibration patterns locally. This has helped in reducing data transfer needs as well as cost of computation in the cloud.

This device is also equipped with features such as secure boot and hardware accelerated cryptography.

Cloud & Deployment

Cloud Platform & Field Deployment

The whole product ecosystem was delivered, which includes cloud platform, dashboards, monitoring tools, device onboarding and even mobile app access. The maintenance crew had the opportunity to observe equipment state, analyse trends, be alerted to faults and plan servicing based on real-life performance.

The device was made with a special consideration for IP65 enclosure and magnetic or bolted mounting systems that would allow its installation on industrial machines. The modular design allowed for deployment in several factory sites.

Results

Results

VibraSense Pro provided the operators with a full predictive-maintenance platform from the NXP hardware and embedded software to edge intelligence, cloud monitoring and application for end users.

Case study: smart-vibration-monitoring-system-imx-rt1060

NXP Projects That Demonstrate Our Delivery Experience

Discover our NXP engineering projects demonstrating real-world experience in embedded software, hardware, and firmware development. Whether you need NXP i.MX Linux boards or microcontroller systems, you can rest assured that our work will show our ability to provide scalable and reliable solutions for industrial and connected applications.

NXP i.MX Smart Camera for Industrial Automation Startup
Smart Camera

NXP i.MX Smart Camera for Industrial Automation Startup

Our team engineered a custom NXP i.MX-powered smart camera for defect detection in industrial production lines for a startup company in North America. The project comprised embedded firmware, PCB design, AI at the Edge, controlled LED strobing, PLC integration, cloud notifications, enclosure design, and manufacturing support. The deployed system worked in three plants and demonstrated 99.7% precision for defect detection.

Read the smart camera case study
NXP S32K Vehicle Telematics Platform
Automotive

NXP S32K Vehicle Telematics Platform

We proved our experience by developing embedded systems for various automotive applications, such as CAN bus communication, GPS tracking, and connected fleets projects, using various Java Spring Boot backend technologies and mobile React Native apps as a part of its work on the NXP S32K vehicle telematics system, which is used in connected cars, fleet management, electric cars, and automotive platforms.

Read the vehicle telematics case study
NXP i.MX Embedded Linux HMI Development
Embedded Linux

NXP i.MX Embedded Linux HMI Development

We have also created HMI solutions for industry using NXP i.MX processors. This involves embedded Linux development, use of Yocto project, Qt programming, touch screen implementation, hardware bring-up, and industrial product design.

Read the embedded Linux HMI case study

NXP Firmware Development Services

Embedded C/C++ and Real-Time Firmware

We develop structured, testable firmware using Embedded C/C++, MCUXpresso SDK, FreeRTOS, Zephyr, bare-metal programming, HALs, BSPs, and middleware suited to the selected NXP platform.

Our firmware work includes:

  • System architecture and task design
  • Interrupt, timer, DMA, ADC, PWM, and GPIO configuration
  • SPI, I²C, UART, USB, Ethernet, CAN, CAN FD, RS-485, and Modbus drivers
  • Sensor, display, touchscreen, camera, motor, encoder, and storage integration
  • Memory, stack, boot-time, and performance optimisation
  • Fault detection, watchdog recovery, diagnostics, and event logging
  • Manufacturing-test firmware and field-service tools

Secure Boot, OTA and Device Lifecycle Management

Connected products must have an update process that is secure from the initial deployment all the way to the eventual use by the end-user. We design secure bootloaders, dual image update capabilities, signed firmware verification, rollback management, versioning, factory provisioning, and OTA updates.

Based on the NXP platform and the requirements of the project, we are able to provide secure key storage, encryption, identity, TLS, APIs, debug configuration and EdgeLock functionality.

Connectivity and Cloud Integration

We connect NXP devices to local networks, industrial systems, and cloud platforms through protocols that match the deployment environment.

Supported integration areas include:

  • MQTT, HTTPS, REST APIs, WebSockets, and TLS
  • Ethernet, Wi-Fi, BLE, Thread, Zigbee, LoRaWAN, and cellular gateways
  • CAN, CAN FD, LIN, Modbus RTU/TCP, RS-232, and RS-485
  • AWS IoT Core, Azure IoT Hub, custom backends, dashboards, and device-management platforms
  • React, Flutter, .NET MAUI, Android, iOS, desktop, and web applications

NXP Hardware and PCB Design Services

Firmware is only dependable when the underlying electronics are designed correctly. Our hardware engineers work alongside firmware specialists from the start, reducing bring-up risk and improving production readiness.

We provide:

  • System architecture and component selection
  • Schematic capture and design review
  • Multilayer PCB layout and power-distribution design
  • DDR, SDRAM, QSPI flash, Ethernet, USB, MIPI, display, camera, and high-speed interface routing
  • RF-aware layouts for Wi-Fi, BLE, Thread, Zigbee, and cellular modules
  • Motor-driver, current-sensing, power-supply, battery-management, and protection circuits
  • EMI/EMC-aware design practices, DRC, Gerber generation, BOM, pick-and-place, and assembly documents
  • Prototype bring-up, debugging, hardware validation, and manufacturing-transfer support

Development on NXP i.MX RT for Challenging Real-Time Devices

i.MX RT crossover MCUs by NXP are a good fit for applications requiring MCU-like predictable behavior along with more room to perform computations compared to traditional microcontrollers. We develop software for i.MX RT devices to power such applications as industrial monitoring, fast data acquisition, motor control, edge analytics, graphics-enhanced HMIs, gateways, and connected devices.

Software development for i.MX RT usually involves working with FreeRTOS tasks, sampling using DMA, DSP/FFT operations, LVGL UIs, Ethernet and MQTT communication, secure boot, OTA update, QSPI Flash, external memory, touch screen, sensor fusion, and edge anomaly detection.

Industries We Support with NXP Technology

Our NXP engineering services are suitable for:

  • Industrial automation and machine monitoring
  • Smart factories and Industry 4.0 systems
  • Motor drives, pumps, compressors, and robotics
  • Embedded Linux HMIs and smart displays
  • Smart cameras, computer vision, and edge AI
  • Automotive ECUs, telematics, diagnostics, and EV systems
  • Energy monitoring, battery systems, and charging equipment
  • Medical electronics and connected healthcare devices
  • Smart-home, building-management, and security products
  • Agricultural monitoring and connected field equipment

From Prototype to Production

We provide support to clients at various levels of product development. The startup company may require architecture verification and prototyping, while the OEM company may require product redesign, firmware stabilization, cost reduction, or a new communication protocol for its mature product.

Our deliverables for the production support phase may consist of the firmware source code, compilation instructions, release versions of the software, schematics, PCB files, Gerbers, bill of materials, programmer software, factory test firmware, test procedures, calibration procedures, manufacturing documentation, and handover support.

When a product needs to be certified, we help with making the product certifiable with documentation, engineering test results, security measures, and collaboration with the client's compliance and test laboratory partners. Certification process will depend upon the product, target markets, radio modules, installation environment, and test results.

Hire NXP Semiconductor Developers

Hire our highly skilled and experienced NXP semiconductors firmware and application developers who will be able to provide you with robust and powerful embedded software solutions that meet your project specifications.

Our specialists are experts in using NXP microcontrollers and processors such as i.MX, LPC, Kinetis, and S32 families for developing firmware that is tailor-made for the customer, Linux-based applications, drivers, software, and hardware integration.

We have worked with various applications related to Automotive, Industrial Automation, IoT, Consumer electronics, and other fields. Our expertise also includes C and C++ programming, RTOS, Linux, interfaces, communication protocols, debugging, and optimization.

Why Choose Adequate Infosoft for Your NXP Projects?

  • Firmware, hardware, cloud, and application development in one place
  • Knowledge base in NXP i.MX RT, i.MX, S32K, LPC, Kinetis, and wireless solutions
  • Ability to work with Embedded C/C++, FreeRTOS, Zephyr, MCUXpresso, Yocto, Qt, Linux
  • PCB, prototype, testing, and production transfer services provided
  • Hands-on expertise in industrial, automotive, energy, IoT, health, and security applications
  • Flexible collaboration for consulting, hiring engineers, building product teams, or delivering projects

Kickstart Your NXP Embedded Product Development Project

From i.MX RT controllers to industrial gateways and embedded Linux HMIs to edge AI products and IoT products with security, we at Adequate Infosoft can help you through the process starting from requirements through to production.

Get in touch with our embedded engineering team for all NXP firmware, PCB, IoT, and cloud-based product development requirements.

Frequently Asked Questions

Which NXP processors and MCUs are supported by you?

We can support projects that involve NXP i.MX RT, i.MX application processors, S32K, LPC, Kinetis, RW61x, and any other appropriate NXP platform. Selection of a particular platform is done based on processing needs, real-time capabilities, connectivity, lifecycle, power consumption, security, and cost.

Can you design a custom PCB for an NXP i.MX RT device?

Yes. We can perform system architecture design, schematic design, multilayer PCB design, power delivery systems, interfacing, external memories, Ethernet, USB, display, sensors, wireless modules, and manufacturing data. We also offer board bring-up services and hardware/firmware debugging.

Can you develop NXP firmware with FreeRTOS or Zephyr?

Yes. We can develop bare-metal, FreeRTOS and Zephyr-based firmware depending on the product needs. In case of embedded Linux NXP i.MX devices, we can work in Yocto Linux environment along with application layers like Qt.

Is it possible to deploy secure boot and OTA update solutions for NXP?

Yes. We design secure-boot and OTA solutions that involve, but are not limited to, signed firmware, versioning, recovery, rollback, secure provisioning, device identification, encryption, and cloud fleet updates.

Is it possible to connect your NXP device to AWS and Azure?

Yes. We configure NXP devices to work with AWS IoT Core, Azure IoT Hub, MQTT servers, HTTPS APIs, dashboards, mobile applications, and custom backends. The solution depends on security considerations, scale, connectivity, and other needs.

Do you provide support for NXP products after prototype delivery?

Yes. We help customers with prototype improvement, firmware support, production test development, OTA updates, diagnostics, part substitution, performance tuning, and new feature development.

Ashok Patel
Ashok Patel
Senior Engineering Project Manager
AI/ML, DevOps, Data Science & Automation | IoT & C#/.NET | Azure & AWS Expert | Certified AI & Cloud Engineer | 1,500+ LinkedIn Followers